Compare tool

Compare models side by side

Pick two to four models. The best figure in each row is marked, and every number comes from the maker, NEEP or ENERGY STAR. Copy the URL to share a comparison.

All mini-splits & heat pumps ranked →All dehumidifiers ranked →All window, wall & room units ranked →All heating ranked →All parts, tools & supplies ranked →

CategoryModel 1Model 2

Spec	Klimaire Entrada 18,000 BTU	Gree Sapphire R32 18,000 BTU 230V
Photo
Our score	Not reviewed yet	SCORE7.5 / 10
Our take	A cheap, cooling-first flare unit: 17 SEER2 and heating that ends at 5°F. Its manual wants an A2L-certified tech, so it is the wrong box for a DIY buyer.	18,000 BTU/h at 5°F against the Livo 18K's 12,100, for a cold-climate room with a licensed contractor.
Nominal size	18,000 BTU	18,000 BTU
Voltage	n/a	230V
Rated heat at 47°F	16,500 BTU/h	18,600 BTU/h
Heat at 17°F	10,000 BTU/h	19,500 BTU/hbest
Heat at 5°F	n/a	18,000 BTU/h
Lowest heating temp	5°F	-22°Fbest
Max heat at lowest temp	9,500 BTU/h	10,800 BTU/hbest
SEER2	17	27.5best
HSPF2 (Region IV)	n/a	10
Install type	Flare	Flare
Line set in box	16 ft	n/a
Max line run	n/a	131 ft
Warranty covers owner install	No	No
Warranty, parts	5 yr	5 yr
Warranty, compressor	7 yr	7 yr
ENERGY STAR	No	n/a
Refrigerant	R-32	R-32
Watch out for	Easy to confuse with the Klimaire DIY 5th Gen; the Entrada title says "17 SEER2" and the line is flare, not quick-connect. Its product page header says heat to -5°F, but its size table and spec sheet say 5°F.	Amazon Sapphire titles show old SEER figures ("21.5 SEER" on the 24K); confirm the SAPxxHP230V1R32AH/AO model numbers. Gree's submittal prints lower 17°F figures than the certified NEEP ratings; go by NEEP. Gree's warranty applies only to installs by a state certified or licensed HVAC contractor, and claims are contractor-only.
More	Model details View on Amazon →	Model details Our full review View on Amazon →