Compare tool
Compare models side by side
Pick two to four models. The best figure in each row is marked, and every number comes from the maker, NEEP or ENERGY STAR. Copy the URL to share a comparison.
All mini-splits & heat pumps ranked →All dehumidifiers ranked →All window, wall & room units ranked →All heating ranked →All parts, tools & supplies ranked →
| Spec | Frigidaire 50 Pint with Wi-Fi (FHDD5034Y1) | Midea Cube 50 Pint with Built-In Pump |
|---|---|---|
| Photo |  |  |
| Our score | SCORE6.4 / 10 | SCORE7.0 / 10 |
| Our take | A real current-test 50 with published noise figures and a 2.7-gallon bucket, equal to the Midea Cube 50 on pints and efficiency. Buy it when it's priced at or below the Cube; the one-year warranty is thin. | The same certified 49.67 pints as the non-pump Cube, with a pump that lifts water 14 feet to a sink or window. Amazon had only used units when we checked, so buy it new elsewhere or pair the non-pump Cube with a separate condensate pump. |
| Capacity (DOE 65°F) | 49.71 pt/day | 49.67 pt/day |
| Efficiency (IEF) | 2.01 L/kWh | 2.01 L/kWh |
| Lowest operating temp | 41°F | 41°F |
| Built-in pump | No | Yes |
| Pump lift | n/a | 14 ft |
| Bucket | 21.6 pints | n/a |
| Noise (maker figure) | 47 dBA | n/a |
| Type | Portable | Portable |
| Warranty | 1 yr | 1 yr |
| ENERGY STAR | Yes | Yes |
| Watch out for | It ships in Auto mode, which won't take a humidity setting; switch to Dry to set a target. One year parts and labor with no sealed-system term; owner reports on older Frigidaire dehumidifiers repeat coil icing and failures inside three or four years. Frigidaire's spec sheet prints 50 pints with no test condition; the 65°F rating comes from ENERGY STAR. Listings titled Frigidaire 50-Pint without a Y1 model number are older units, such as the FFAD5034W1. | Midea's older Canadian Cube (MAD50PS1QGRC, R410A) claims a 16.4 ft pump; the current US model is rated 14 ft. Go by the 14. The Amazon pump listing (B091BYVD2W) had only used offers when checked; we don't link it. Owners report the pump never empties the tank past about half and the app shows no tank status, so a pump fault can go unnoticed. Check the built-in humidity reading against a separate hygrometer in week one; a stuck-near-30% or ~20-points-low reading on a new unit is a known return-window fault. |
| More | Model detailsOur full reviewView on Amazon → | Model detailsOur full reviewMaker / dealer page → |